Caliper Mechanism Gear Shaft Factors On Brakes

 The heat generated by friction is distributed by the cooling fins mounted on the plate with axis. The friction plate is a dual separator and  friction plate can be exchanged by a screw stuck through a screwdriver through the hole with a shaft disk.  

 Air brakes presents the characteristics of simple structure, a stable operation, practical installation, no noise, good linear, without a few noloads, fast heat dissipation, light weight, adjust reality and high temperature resistance in a high load.

 Pneumatic brakes It is widely used in various industrial machine transmission systems, which can play a cutting, combined, double, reverse and moving role on caliper mechanism gear shaft. Air brakes usually use DC24V. The voltage fluctuation should not exceed 5% of the rated voltage and the friction surface should  be free from oil and  debris that could affect the normal operation of the brake disc caliper rebuild kits and truck brake spare parts. If a pneumatic disc brake is installed, the shaft position must be adjusted. The clearance must be adjusted according to the setting value, and the  shaft installation should be kept within 0.1mm to maintain the normal operation and characteristics of the air brake.